Gasboy CFN Series NBS - Manual (Page 39)

MDE-4390F Gasboy CFN Series NBS (GL3) Credit and Debit Card Network V 1.3.0.0 · November 2008 Page 35
Special System Setup Using NBS
Console (CONSOLE)
After running initialization, the parameters are set to these values:
Console Parameter Required Setting
Allow hand entry of card data Yes
POS asks for odometer on fuel sale 1 (Card-encoded)
POS asks for auxiliary # on fuel sale 1 (Card-encoded)
POS asks for odometer on merchandise sale 1 (Card-encoded)
POS asks for auxiliary # on merchandise sale 1 (Card-encoded)
The Console parameters for Odometer and Auxiliary prompts must be acceptable to the new
PCI-compliant PIN pads. Review the Reader Parameter section for the acceptable system
prompts. If the prompts deviate from the suggested list, the PIN pad will not work correctly.
Refer to MDE-4314 CFN III configuration manual for details on setting up the Console.
Special Card Keys for Manual Entry
If you accept manual entry for certain types of cards at the Profit Point (Wex, Voyager, and
Cenex Regional), the modular Profit Point must be running version 2.3B or above or the
integral Profit Point must be running 3.3B or above. Manual entry of these cards is not
possible at the CheckPoint.
With NBS, you may need to set up special keys on the Profit Point for handling the manual
entry of certain types of cards. After you make the assignment, the keys should be labeled to
indicate their new use. The manual-entry process is identical to the standard method of using
the
CREDIT
key (which is described in MDE-4355 Profit Point Clerk’s Manual). You must
assign keys on the Profit Point, or use special function 68, if you want to manually enter these
card types. After you make the assignment, the keys should be labeled to indicate their new
use.
On the Profit Point, special function 68 displays the Network card selection menu. You can
deactivate the cards you do not want by commenting out, with an asterisk in the first column,
the appropriate line in the CONFIG.POS file (refer to MDE-4356 Profit Point Reference
Manual, Set up CONFIG.POS File section).
When changing the CONFIG.POS to include special card types for which you will allow
manual entry, you will use three columns in the Setup menu: Network Card, Type, and Prefix.
The following table lists the type and prefix numbers for special network cards accepted by
NBS:
Card Type Prefix
Cenex Regional Card 94 00707873
Cenex Local Card 94 00+6-digit site ID
Voyager 97 7088
Wex 99 690046