Fluke Biomedical TNT 12000 - Manual (Page 90)

TNT 12000
Users Manual
3-14
Table 3-3. mAs Excel Add-In Menu and Toolbar Options
Option Description
Battery Shows the battery status of the connected Detector
Connection Looks for available Detectors.
Template Used to set the Fluoro, Radio, or Mammo template.
Mode Used to set the measurement mode to Fluoro, Radio, Mammo, or Dental.
Settings Disabled in mAs.
Parameter Configuration Sets the measured parameters to show and sets the order for each
measurement mode in the Excel add-in.
Power Settings Used to set the system low power mode time and system shutdown time.
mA Input Used to set the mAs measurement input mode between shunt and clamp.
Download Waveform
Only enabled after an exposure and is disabled while a mAs measurement is
in progress. Downloads the kV waveform.
Stop Keeps the measurement data of the exposure. (During Fluoroscopic
measurement only)
Help Shows the TNT 12000 Excel Add-In help file.
About Excel Add-In Shows the TNT 12000 Excel Add-In version, serial number, firmware version,
hardware version, and calibration date of the connected Detector. (Available
only in TNT 12000 menu)
Note
In Microsoft Excel 2003, click mAs tab in the toolbar to show the mAs
Menu.
fct319.bmp
Figure 3-14. mAs Excel Add-In Menu and Toolbar (Excel 2003)