Fluke Biomedical TNT 12000 - Manual (Page 18)

TNT 12000
Users Manual
1-6
Familiarization
To use the TNT 12000, you must first connect the Display to the X-ray Detector or
Dosimeter Detector. Tables 1-2 through 1-4 shows the controls, indicators, and
connectors of the Display and Detectors.
Table 1-2. Display Components
RESET
1
2
3
4
5
6
7
8
9
10
fct02.eps
Item Name Description
A LCD Panel 320X240 color display
B Battery-status Indicator Tri color LED indicating the battery status of the display.
Refer to the Battery Charging section for more details.
C On/Off Switch Powers the display On/Off
D Navigational Keys:
Left, Right, Up, and Down keys Moves the cursor through the menu options on the display
screen in various directions.
Note: The cursor movement is circular
E Enter key Selects the menu option on the display screen
F Stand Display support stand
G Holster Protective cover for the display
H USB Connector To connect the detector or a Computer via USB cable
I AC adapter connector Connects the ac adapter
J Reset switch Resets the display
Note
A short beep sounds for a valid key press, and a long beep sounds for an
invalid key press.