Fluke Biomedical TNT 12000 - Manual (Page 86)

TNT 12000
Users Manual
3-10
fct314.bmp
Figure 3-9. TNT 12000WD Excel Add-In Menu and Toolbar (Excel 2007)
Table 3-1. TNT 12000WD Excel Add-In Menu and Toolbar Options
Option Description
Battery Shows the battery status of the connected Detector
Connection Looks for available Detectors.
Template Used to set the Fluoro, Radio, or Mammo template.
Mode Used to set the measurement mode to Fluoro, Radio, Mammo, or Dental.
Settings Used to set the measurement mode profile to Auto, Manual, User defined, or
Default.
Parameter Configuration Sets the measured parameters to show and sets the order for each
measurement mode in the Excel add-in.
Power Settings Used to set the system low power mode time and system shutdown time.
Download Waveform
Downloads the kV waveform. (This option is only enabled after an exposure is
made and is disabled when the TNT 12000WD is making a measurement.
Stop Keeps the measurement data of the exposure. (During Fluoroscopic
measurement only)
Help Shows the TNT 12000 Excel Add-In help file.
About Excel Add-In Shows the TNT 12000 Excel Add-In version, serial number, firmware version,
hardware version, and calibration date of the connected Detector. (Available
only in TNT 12000 menu)
Note
In Microsoft Excel 2003, click TNT 12000 tab in the toolbar to show the
TNT 12000 Menu.