Fluke Biomedical TNT 12000 - Manual (Page 75)

Operation
Setup Options
2
2-47
System Off Time
The system shuts down if there are no measurements or key pushes for the time period set
for System Off Time. To set a System Off Time:
1. Use the C or D to highlight the System Off Time drop-down list.
2. Push E.
3. Use the C or D to highlight the number of minutes (2 to 9 minutes or None). The
none setting disables System Off Time and the system never shuts down.
4. Push E.
Push O to restart the system.
Brightness
To set the brightness of the Display:
1. Use the C or D to highlight the Brightness drop-down list and push E.
2. Use the C or D to highlight a number (0 to 99) and push E.
3. Push E.
How to Set the Date and Time
The SET DATE/TIME screen in Figure 2-26 allows you to set the Date and Time.
fct204.png
Figure 2-26. Date and Time Setting Screen
To set the Date:
1. Use the C or D to highlight the Month, Day, or Year drop-down list and push
E .
2. Use the C or D to highlight the number for the Month, Day, or Year and push
E .
To set the Time:
1. Use the C or D to highlight the Hour, Min, or AM/PM drop-down list and push
E .
2. Use the C or D to highlight the number for the Hour or Min, or AM or PM and push
E .
When a date and/or time is set, highlight the Save button and push E to save the
new settings.