Fluke Biomedical TNT 12000 User Manual
Page 42
TNT 12000
Users Manual
2-14
8. Use C, D, B, and A to highlight a character and push E to construct a name
that identifies the user-defined profile. You can have a maximum of 8 characters in
the name.
9. Use C or D to highlight the Save button and push E. The profile is saved
with the name and the Detector is set to the user-defined profile. The
MEASUREMENT SETTINGS screen shows in the Display with the new user-
defined button added.
fct223.png
Note
The example above shows a user-defined profile button labeled U5.
To change the name of a user-defined profile from the MEASUREMENT SETTINGS
screen:
1. Use C or D to highlight the user-defined profile button you want to change the
name of and push E.
2. Use C or D to highlight the Edit button and push E.
3. Use A or B to highlight the Save button and push E to open the
ALPHANUMERIC screen.
4. Use C, D, B, and A to highlight a character and push E to construct a new
name for the user-defined profile. You can have a maximum of 8 characters in the
name.
5. Use C or D to highlight the Save button and push E. The profile is put in
memory with the name and the Detector is set to the user-defined profile. The
MEASUREMENT screen shows in the Display with the user-defined button
renamed.
To delete a user-defined profile from the MEASUREMENT SETTINGS screen:
1. Use C or D to highlight the user-defined profile button you want to delete and push
E
.
2. Use C or D to highlight the Edit button and push E.
3. Use A or B to highlight the Delete button and push E. The profile is removed
from memory and the MEASUREMENT screen shows in the display.