Comtech EF Data XSAT-7080 - Manual (Page 90)

XSAT7080 X-Band Transceiver Revision 0
5-25W Installation MN/XSAT7080.IOM
A–8
Figure A-7. Mounting XSAT
Unit
A.4.3 LNA I
NSTALLATION
The LNA can be mounted at three different options (Customer Select):
• Spar Mount, 1 X 2 Antenna, Mounting Kit P/N,
AS/0422
• Spar Mount, 1.75 X 4 Antenna, Mounting Kit,
P/N AS/0501
• Feed Horn Mounting Kit (Contact Comtech EF
Data Customer Support department)
To install a single LNA to an antenna:
Step Procedures
1 Remove the protective cover from the antenna OMT and LNA.
2 Install the appropriate gasket on the antenna end of the LNA.
a. If only one of the mounting surfaces has a groove, use the half-thick
gasket.
b. If both mounting surfaces have grooves, use the full thick gasket.
3 Position the LNA (with gasket) in place on the antenna and fasten using the
supplied hardware.