Comtech EF Data XSAT-7080 - Manual (Page 22)

XSAT7080 X-Band Transciever Revision 0
Specification MN/XSAT7080.IOM
2–2
Common Environmental
Conversion Dual, No Spectral Inversion Temperature:
Operating
Non-Operating
-40 to +55
°C (-40 to 131°F)
-50 to +75 °C (-58 to 167°F)
Frequency
Step Size 1 and 2.5 MHz automatic Attitude 15,000 Feet, mean sea level
Frequency
Stability ± 1 x 10 -9 /day
1 x 10 -7 /day
40 ° to 55°C 1 x 10 -8 / Temp
Humidity 0 to 100 %, Relative
Attenuation
Steps TX
RX 0 to 25 dB, in 0.25 dB steps
0 to 20 dB, in 0.25 dB steps Prime Power 90 to 260 VAC Standard
47 to 63 Hz Standard
48 VDC Optional
Phase
Noise 100 Hz
1 kHz
10 kHz
100 kHz -66 dBc/Hz
-76 dBc/Hz
-86 dBc/Hz
-96 dBc/Hz Dimensions:
5 to 25W
50W
100W
11H x 8W x 11D inches
(28H x 20W x 28D cm)
9.75H x 10W x 23d inch
(25H x 25W x 58D cm)
10.60H x 12.5W x 26D inches
(27H x 32W x 66D cm)
Group
Delay Linear
Parabolic
Ripple 0.1 ns/MHz
0.02 ns/MHz
2
1 ns/p-p
Weight:
5 to 25W
50W
100W
36 lbs (16 kg)
65 lbs (29 kg)
80 lbs (40 kg)
Monitor & Control Low Noise Amplifier Customer defined
Methods Both RS-485 and RS-232 Serial
Interface Handheld controller, optional Model:
Commands Set TX frequency
Set RX frequency
Set TX attenuation
Set RX attenuation
Report TX output power
Mute TX
Report internal temperature
Report power supply voltages
Set time
Set date
RF Power
AC Power
5W
165W 10W
220W 25W
275W 50W
450W 100W
825W
Faults Upconverter functions
Downconverter functions
Upconverter Synthesizers
Downconverter Synthesizers
Internal Reference Oscillator
LNA current fault
Overtemperature condition