Comtech EF Data XSAT-7080 - Manual (Page 105)

XSAT7080 X-Band Transceiver Revision 0
5-25W Installation MN/XSAT7080.IOM
A–23
1
2
3
4 (4PLS)
5
6
8
(8 each, 4PLCS)
7 (Underneath)
5
6
9
10
11
Typical LNA
Typical LNA
Figure A-22. LNA Switch Kit, AS/9751-1 (Shown with Typical LNAs)
Step Procedures
IMPORTANT
Ensure that the OUTPUT flange of the filter is against switch (11).
6 Loosely bolt bracket (2) to plate (1) as shown with screws (9), washers (5), and
lockwashers (6).
7 Secure assembled switch to plate (1) using screws (7) installed through the
bottom of the plate.
8 After Customer-Supplied Input waveguide has been secured to the RF Input,
tighten bracket screws (9). Ensure all hardware is secured.