Comtech EF Data XSAT-7080 - Manual (Page 35)

XSAT7080 X-Band Transceiver Revision 0
System Operation MN/XSAT7080.IOM
3–9
3.3.18 S
ET
P
HYSICAL
A
DDRESS
The Remote (Physical) address to which the XSAT will respond can be set to any value
between 0001 and 9999. (The factory default is 0001)
Associated Remote Command(s): SPA=
3.3.19 S
ET
B
AUD
R
ATE
The Baud Rate of the communication port, J5, can be set to any values shown below:
1200, 2400, 4800, 9600, 19200, 38400 (The factory default is 9600)
Associated Remote Command(s): SBR=
3.3.20 S
ET
D
ATE
The XSAT contains a battery powered Real Time Clock (RTC) used to provide
Date/Time stamping of events, alarms and faults. The date can be changed by the user.
Associated Remote Command(s): DAY=
3.3.21 S
ET
T
IME
The XSAT contains a battery powered Real Time Clock (RTC) used to provide
Date/Time stamping of events, alarms and faults. The time can be changed by the user.
Associated Remote Command(s): TIM=