Comtech EF Data XSAT-7080 - Manual (Page 64)

XSAT7080 X-Band Transceiver Revision 0
Redundant Systems MN/XSAT7080.IOM
5-8
5.3 RSU-5060 O
PERATION
The RSU-5060 is designed to provide single-point control for both the Tx and Rx transfer
switches (Waveguide Switches). In addition, the RSU-5060 provides the customer with a single
interface connection to his M&C system. Through this interface the customer can access and
control all configuration, monitor and faults status parameters of both XSAT’s. The RSU-5060 is
a ‘smart box,’ the unit contains a micro controller running algorithms to process status and
command information from the two XSAT’s and control the Tx and Rx waveguide switches
accordingly. A functional block diagram of the RSU-5060 is shown in Figure 5-4.
RS485 Tx+
RS485 Tx-
RS485 Rx+
RS485 Rx- RS485 Tx+
RS485 Tx-
RS485 Rx+
RS485 Rx-
RS485 Tx+
RS485 Tx-
RS485 Rx+
RS485 Rx-
Micro
Controller
A AUXCOM Td
A AUXCOM Rd
B AUXCOM Td
B AUXCOM Rd
RS232 line
Drives and
Recievers
&
Multiplexer
Td
Rd
a
b
c
A FAULT N.O.
REDUNDANCY A*
POSITION A*
REDUND_FLT*
B FAULT N.O.
REDUNDANCY B*
POSITION B*
REDUND_FLT*
B SELECT*
XSAT A
+24 VDC
XSAT B
+24 VDC
Rx
TRANSFER
SWITCH
Tx
TRANSFER
SWITCH POS A CMD
POS B CMD
POS A IND
POS B IND
POS A CMD
POS B CMD
POS A IND
POS B IND
Signal
Conditioning
RED AUTO/MAN
SWITCH CMD
A ONLINE CLOSED
B ONLINE CLOSED
A FAULT OPEN
B FAULT OPEN
Customer
Monitor
&
Control
RSU-5060
Figure 5-4. RSU-5060 Functional Block Diagram