Comtech EF Data XSAT-7080 - Manual (Page 103)

XSAT7080 X-Band Transceiver Revision 0
5-25W Installation MN/XSAT7080.IOM
A–21
Step Procedures
8 Place a unit on each bracket (1, figure A-2) and secure with four bolts
(2), flat washers (4) and lock washers (6)
9 Position assembled TX switch (1,figure A-15) on bracket (1, figure A-11) and
secure with two screws (4), flat washers (2), and lock washers (3).
Figure A-19. Installation of
XSAT Transceivers
Figure A-20. Redundant
Configuration with Cables
Installed