Comtech EF Data XSAT-7080 - Manual (Page 21)

- 2–1
Chapter 2. SPECIFICATIONS
2.1 S
PECIFICATIONS
IMPORTANT
Comtech EF Data reserves the right to change specifications of productions
described in this document at any time without notice and without obligation
to notify any person of such changes. Information in this document may differ
from that puiblished in other Comtech EF Data documents. Refer to the
website or contact Customer Support for the latest released product
information.
Transmit Receive
Frequency 7900 to 8400 MHz RX Frequency 7250 to 7750 MHz
TX-IF Frequency 70 ± 18 MHz
140 ± 36 MHz (Optional)
RX-IF Frequency 70 ± 18 MHz
140 ± 36 MHz (Optional)
Output Power, P1dB 5W
10W
25W
50W
100W +37 dBm
+40 dBm
+44 dBm
+47 dBm
+50 dBm Gain without LNA 45 ± 1 dBm
Gain 5W
10W
25W
50W
100W
+65 dB
+68 dB
+71 dB
+74 dB
+77 dB Gain Flatness
without LNA
± 0.75 dB Full RF Band
± 0.75 per 36 MHz
Gain Flatness
± 0.75 dB Full RF Band
± 0.75 per 36 MHz
Gain Stability,
without LNA
± 0.25 dB constant temp
± 1.00 dB –40 to +55°C
(-40 to 131
°F)
Gain Stability ± 0.25 at Constant C
± 1.00 dB from –40 to +55°C
(-40 to 131
°F)
Output Power, P1dB +13 dBm
Carrier Mute -70 dBc Two Tone
Inter-modulation -50 dBc for two tones at
0 dBm each, 1 MHz apart
Intermodulation -33 dBc for two carriers at –6 dB
OPBO from rated power Image Rejection -60 dBc
2 nd Harmonic -55 dBc RF Input VSWR 1.25:1
Spurious AC line harmonics
Carrier Related,
< 500 kHz
All other in-band
-45 dBc
-60 dBc
-65 dBc RF Input Connector Type N (Female)
AM to PM Conversion 3 degrees at 6 dB
OPBO from related power IF Output Impedance 50 Ω
RF Output VSWR 1.25:1 IF Output VSWR 1.25:1
RF Output Connector 5 – 25W
50W and 100W Type N Female
CPR-112 IF Output Connector Type N (Female)