Dot Hill Systems II 200 FC - Manual (Page 195)

I-1
APPE NDIX I
Configuring an HP Server Running the
HP-UX Operating System
This appendix provides platform-specific host installation and configuration
information to use when you connect a FC or SATA array to an HP server running the
HP-UX operating system.
The FC, SATA, and SATA SE arrays support the HP-UX operating system Level 11.0
and Level 11.i in dual-path configurations using multipath
failover drivers for the HP-
UX operating system.
The information in this appendix covers the following steps:
■
“Setting Up a Serial Port Connection” on page I-1
■
“Accessing the Firmware Application From an HP Server Running HP-UX” on
page I-2
■
“Attaching the Disk Array” on page I-4
■
“Logical Volume Manager” on page I-4
■
“Definitions of Common Terms” on page I-5
■
“Creating a Physical Volume” on page I-5
■
“Creating a Volume Group” on page I-6
■
“Creating a Logical Volume” on page I-7
■
“Creating an HP-UX File System” on page I-8
■
“Mounting the File System Manually” on page I-8
■
“Mounting the File System Automatically” on page I-8
■
“Determining the Worldwide Name for HP-UX Hosts” on page I-9
I.1 Setting Up a Serial Port Connection
The RAID controller can be configured by means of a host system running a VT100
terminal emulation program or by a Microsoft Windows terminal emulation program
such as Hyperterminal.