B.9 downloading firmware to disk drives in a jbod, Downloading firmware to disk drives in a jbod, B–11 – Dot Hill Systems II 200 FC User Manual
Page 157
Appendix B Using a Standalone JBOD Array (SANnet II 200 FC Array Only) B-11
4. Click OK.
The JBOD array is displayed in the main window.
In a single-bus configuration, both ports of the JBOD array are connected to one HBA
on the server, as shown in the following example:.
In a split-bus configuration, each port is connected to its own HBA, as shown in the
following example:
B.9
Downloading Firmware to Disk Drives in a
JBOD
For instructions on how to download firmware to disk drives in a JBOD directly
attached to a host, refer to the README file in the patch that contains the firmware.