Becker TRAFFIC ASSIST PRO Z302 - Manual (Page 72)

72
>>> NAVIGATION MODE
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
The Blocked roads button
In the Blocked roads settings window you
can unblock previously permanently
blocked roads (See “Blocking route sec-
tions/roads” on page 88.) or you can
modify the block (time and days of week
of block).
> Press the
Blocked roads button in the
settings menu.
A window is displayed containing the
roads that have previously been blocked.
> Select the desired blocked road.
> Press the Clear form button to remove
the road from the list.
or
> Press the
Change button to modify the
block.
> Use the buttons to set the period
(days of the week) when the road is to
be blocked.
> Use the buttons to set the period
(time of day) when the road is to be
blocked.
> Confirm your settings by pressing the
OK button.
The Reset button
You can reset the navigation settings to
their factory settings.
The settings will then be reset. The fast ac-
cess mode data, stored routes and home
address are retained.
> Press the Reset button.
> Press the Yes button.
The navigation settings are reset to their
factory settings.
Note:
If you select, e.g. Tuesday to Tuesday for
the day of the week, the block only ap-
plies on Tuesdays.
1 1 1 1
2 2 2 2
1
2