Becker TRAFFIC ASSIST PRO Z302 - Manual (Page 33)

33
GENERAL OPERATION >>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Connecting the remote control to
the Traffic Assist Pro
Connecting for the first time
> Switch on the Traffic Assist Pro.
> Press the button on the remote con-
trol.
The connection to the Traffic Assist Pro is
established.
Reconnecting or connecting to another
device
> Switch on the Traffic Assist Pro to
which you wish to connect the remote
control.
> Press the buttons , and on
the remote control simultaneously.
The connection to the activated Traffic
Assist Pro is established.
Replacing the battery
If the Traffic Assist Pro stops responding
to commands from the remote control,
the battery in the remote control is proba-
bly dead.
> Remove the remote control as described
above.
> Remove the old battery and replace it
with a new type CR2032/DL2032 bat-
tery.
> Place the remote control back onto the
base plate.
> Reconnect the remote control to the
Traffic Assist Pro as described above.
2
3
1
1
1 2 3
!Danger!
Keep the battery away from children.
Consult a doctor immediately if a child
swallows a battery.
Batteries must not be dismantled, short-
circuited or thrown into a fire.
Environmental note:
Batteries must not be disposed of in
household waste.
It is the legal duty of the user to return
used batteries. You can hand in your old
batteries free of charge at local municipal
collection points or wherever batteries are
sold.