Becker TRAFFIC ASSIST PRO Z302 - Manual (Page 20)

20
>>> GENERAL OPERATION
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
Connecting up external antenna
To enable reception under adverse recep-
tion conditions, an external GPS antenna
can be connected (not included). For this
purpose, a closable connecting socket is
located on the rear of the housing. If no
external antenna is connected, this con-
nection must always be closed again.
> Open the closure by pulling gently on
its upper surface.
> Connect the external antenna using the
optionally available adapter.
Cable for vehicle integration
(optional)
With the optional cable you can integrate
your Traffic Assist Pro seamlessly into
your vehicle.
With this cable you can:
• connect the power supply.
• connect your Traffic Assist Pro to the
phone mute function of your audio sys-
tem. If the cable is connected correctly,
your audio system will mute the car ra-
dio during navigation announcements.
• connect your Traffic Assist Pro to your
audio system for output of the audio
signal.
• connect a USB memory stick to your
Traffic Assist Pro.
The individual connectors on the other
end of the cable are labelled.
> Insert the cable into the socket provided
in the carrier plate.
Note:
The Video-In connector has no function
on the Traffic Assist Pro Z301 and Z302
units.