Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 93)

Installing under UNIX/LINUX
AX3000 - User's Manual
79
The Axel SSH client is compliant with OpenSSH 1.5.
To accept Axel SSH connections, the SSH server must first accept connections
from SSH V1 clients and support the password authentication mechanism.
These two functions are indicated in sshd_config file by:
Protocol 2,1
PasswordAuthentication yes
d) The Serial Ports (Aux1, Aux2…)
The Axel terminal supports both TCP/IP and serial (RS232) connections.
To establish a serial connection, the session 'Protocol' must be set to 'serial'.
Then set 'Main Serial Port' to a native serial ports or an USB serial port.
The selected auxiliary port is set-up through the [Configuration]-[Ports]-[xxx]-
[yyy] menu (see Chapter 3.5.1).