Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 190)

Installing under Windows
176
AX3000 - User's Manual
d) Remapping a COM port
Terminal COM ports must be remapped to server COM ports. The remapping
commands are "change client" or "net use". These commands may be issued
from a command prompt from the terminal’s Citrix session.
Example: the Windows COM4 port is remapped to the terminal COM1 port
net use com4: \\client\com1:
or
change client com4: com1:
Note: this remapped resource is only for the terminal. In this example COM4 is
not seen by other users.
☺ : How to set-up a user account to automatically launch a "net use" command.
- Create a shareable directory called Netlogon.
- In this directory create a file called "myscript.bat".
- Enter the 'net use' command line as required in this file.
- Edit the user account properties by selecting the 'profile' tab and set the
"Logon script" to read the "myscript.bat" file.
For more details see Windows help on Netlogon.
8.2.7 - Bandwidth
Within the 'Session Profile' box, select 'Bandwidth' and press . The
following box is displayed:
These parameters are:
- Compress: this allows Windows to send compressed data. This
optimises bandwidth but in some cases can decrease overall
performance.