Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 172)

Installing under Windows
158
AX3000 - User's Manual
- Additional Parameters: pressing displays a dialog box, which
lets certain RDP parameters be changed. For more information, see
Chapter 8.1.2.
- Redirected Resources: press to set redirected printers and
COM ports. For more information, see Chapter 8.1.4.
- Bandwidth: pressing displays a dialog box, which lets certain
parameters be changed. For more information, see Chapter 8.1.5.
Note: after saving changes power-cycle the AX3000.
8.1.2 - RDP Additional Parameters
Within the 'Session Profile' box, select 'Additional Parameters' and press
. The following box is displayed:
These parameters are:
- Encryption: three values of encryption are available. (For more
information see Chapter 8.4.1):
- No: only non-encrypted connections are accepted.
- Low Level: only one-direction encrypted connections are accepted.
(Data sent by Windows is encrypted).
- Medium Level: both-direction and one-direction encrypted
connections are accepted.
- High Level: only both-direction encrypted connections are
accepted.
- Connection Name: this character string identifies the AX3000 within the
Windows Operating System. By default this name is the terminal name
(see Chapter 3.1.1).
Note: This is not the identifier used by Windows for licensing control. The
licensing identifier cannot be changed.