Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 137)

Installing under OS/400
AX3000 - User's Manual
123
These parameters are:
- TERM Value: terminal capabilities. Default value is IBM-3477-FC.
- Auto-Connection: if this parameter is set to 'yes', the connection will be
automatically established when the AX3000 is powered. Otherwise, the
user can press to establish the connection.
- Auto-Reconnection: if this parameter is set to 'yes', a new connection is
automatically established after a disconnection. Otherwise, the user can
press to establish a new connection.
- Session Label: this character string (11 characters max.) is used to
identify the session within the session manger or in the status line.
- Enhanced Parameters: see Appendix A.10.3.
6.2 - USING THE AX3000
6.2.1 - The 5250 Status Line
Note: the 5250 status line is different than the AX3000 TCP/IP status line. (The
AX3000 TCP/IP status line displays information about current connected
sessions. This line can be enabled/disabled through the AX3000 Set-Up).
The 5250 status line is displayed at the bottom of the screen and gives the
following information:
System Available Upper Shift
Message(s) Waiting Caps Lock Function key Assignment
Input Inhibit Insert
]
(
X © A ^ ð R 63 „ LL/CC
Available Keystrokes Cursor
Mode: R (Record) Locator
P (Process)
Diacritic Mode