Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 220)

Tools and Statistics
206
AX3000 - User's Manual
9.3.2 - Interface Statistics
The following information is displayed:
In the above dialog box, the following information is given:
- FQDN: terminal full name (if given)
- State: the current DHCP state. The possible states are:
- selecting: searching a DHCP server (broadcast)
- requesting: requesting an IP address from the DHCP server
which answered 'selecting'
- bound: search has been successfully completed (IP address has
been set)
- free: DHCP protocol is not enabled or DHCP protocol failed
- renewing: renewing the leased IP address to the DHCP server
which answered 'selecting'
- rebinding: renewing the leased IP address to any DHCP server
(broadcast)
- DHCP Server: IP address of the DHCP server.
- Lease Time (seconds): amount of time of the leased IP address. For
BOOTP protocol, the value is 'infinity'.
- Remaining Lease: remaining time before lease expires. For BOOTP
protocol, the value is 'infinity'.
- Update Type: information about the DNS server update when updated
by the terminal. Main values are:
- None: no update
- Direct / Reverse: both types are done by the terminal.
- Direct / Reverse (by DHCP): direct update done by the terminal
and reverse update done by the DHCP server