Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 280)

Appendix
266
AX3000 - User's Manual
The main capabilities of the bootpd configuration file are as follows:
- tc: network description
- ht: network type
- sa: IP address of tftp host
- gw: optional router
- ha: Ethernet address of the AX3000
- ip: IP address of the AX3000 (this address is only used during the
downloading operation)
- bf: full firmware file name (path included)
Examples of bootp configuration files:
a) When the AX3000 and the tftp host are on the same network
net:hn:df=/etc/btdump:ht=ethernet:sa=192.168.1.252:to=auto:
axel1:tc=net:ht=ethernet:ha=00A034000001:ip=192.168.1.242:bf=/tmp/axel:
b) When the AX3000 accesses the tftp host via a router
net:hn:df=/etc/btdump:ht=ethernet:sa=192.1.1.243:to=auto:
net1:tc=net:sm=255.255.255.000:gw=192.168.1.252:
axel1:tc=net1:ht=ethernet:vm=rfc1048:ha=00A034000001:ip=192.168.1.242:bf=
/usr/axel/firm9645:
IMPORTANT: if a problem occurred during a previous download operation
(whatever method was used), the firmware of the target AX3000 may have
been erased. To restore valid firmware, the bootp+tftp protocol will
automatically be run when this target AX3000 is switched on.
a) Remote Administration
The remote administration command depends on the operating system. Refer
to the Chapter 5.5 (Unix/Linux), the Chapter 6.4 (OS/400) or the Chapter 7.3
(OS/390).
Example for Unix/Linux:
# rsh ax3001 ax_download password