Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 271)

Appendix
AX3000 - User's Manual
257
Click ‘OK’ to exit this box and 'OK' again to exit the former box.
3 - In the left panel select 'Server Options’ then right click ‘Configure Options’
Within the available options ‘tick’ the new Axel entry and enter IP and TCP port
details as below as ‘string value’. For example:
Note: the changes take immediately effect.
A.6.3 - 'axrmserv' option: auto-configuration
The axrmserv option always the network location of the AxRM server to be
broadcast.
The format is as follows:
axrmserv:param1:param2