Axel AX3000 65 User's Manual - firmware 0632 User Manual
Page 230
Remote Administration
216
AX3000 - User's Manual
ERR 113: password required
Command:
setup_send, ax_reboot and ax_download
Cause:
the AX3000 Interactive Set-Up is password-protected. This
password hasn't be specified within the command.
Consequence: no effect.
Solution:
use the right password.
ERR 114: invalid password
Command:
setup_send, ax_reboot and ax_download
Cause:
the AX3000 Interactive Set-Up is password-protected. This
right password hasn't be specified within the command.
Consequence: no effect.
Solution:
use the right password.
b) Warning Error Messages
Warning error messages do not stop the command but indicate a problem (such
as a syntax error). The following warnings may occur:
ERR 201: xxx: unknown parameter name.
Command:
setup_send
Cause:
the set-up parameter (xxx) is unknown.
(e.g.: s1_screencolumn instead of s1_screen_column).
Consequence: the set-up parameter is ignored. The current value of this
parameter is retained.
Solution:
check the spelling of the set-up parameter (Appendix A.5).
ERR 202: xxx: invalid value.
Command:
setup_send
Cause:
the value assigned to this set-up parameter (xxx) is not
valid (example: multi_nbpage=10).
Consequence: the set-up parameter is ignored. The current value of this
parameter is retained.
Solution:
check the possible values of this parameter (Appendix A.5).