Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 210)

Installing under Windows
196
AX3000 - User's Manual
- The printer dataflow can be compressed.
- The display and printer data flows are multiplexed by TSE.
The following applies only with LPD printer configuration. For an RDP printer
see Chapter 8.1.4 and for an ICA see Chapter 8.2.5.
8.6.1 - Setting-Up the AX3000
To set the LPD service on the terminal port, select the [Configuration]-[Ports
aux.]-[xxx] dialog and enter the following parameters:
- Associated Service: select lpd.
- Net Service Parameters: press to access the following dialog
box:
- Printer Port Name: this is the port identifier. Sometimes the same
name is used for the printer at the operating system level.
- NL=CR+NL Filter: set to "no",
- Enhanced parameters: see Appendix A.10.3.
- Pre-print String: leave it empty.
- Post-print String: leave it empty.
Note: if the auxiliary port used for printing is a serial port, set the 'Printer'
operating mode.
8.6.2 - Setting-Up the Windows Server
To add a printer, select the 'Add printer' icon (in the 'Start'¤'Settings'¤'Printers'
menu).
Within the displayed dialog box, select 'Local printer' (Disable the Plug-And-
Play detection). Click on 'Next'.
Within the next dialog box, select 'Create a new port' and select 'LPR Port'.