Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 165)

Installing under OS/390
AX3000 - User's Manual
151
The recorded data is stored in non-volatile memory so is not affected by
switching off.
Recorded keystrokes can be assigned to any of the twelve function keys (
to ).
a) Programming a Function Key
To record a series of keystrokes proceed as follows:
- Press to set the record mode,
- Press any of the 12 function keys to which you want to assign,
- Type the key sequence you want to save,
- Press to exit the record mode.
Notes:
- Memory usage: maximum 256 keystrokes recorded per function key.
- To delete a recorded function key, you have to record an empty key
sequence.
Example:
1 - Press to set the Record mode. The 3270 status line is
set in reverse video mode and the following information is displayed
(the 12 boxes are the 12 function keys, a solid box means that data is
recorded):
MEMOR „ 17/21
2 - Press one of the function keys (from to ). The 3270 status
line is set in normal mode and the following information is displayed:
R 256 F1 17/21
Note: 'R' indicates the Record mode. The second field is the maximum
keystrokes that can be recorded for this session. The third field is the
selected function key.
3 - Type the key sequence.
4 - To exit the Record mode, press .