Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 237)

Appendix
AX3000 - User's Manual
223
During this mode the following keys are enabled:
- : confirmation
- : abandon your changes
- move the cursor within the character string
- and : move the cursor directly to the beginning or the
end of the string
- : delete the character at the cursor position
- : delete the character before the cursor position
- : one of two editing modes:
- Insertion (default): the cursor takes the form of a blinking line or
- Overwrite: the cursor takes the form of a blinking block.
To enter characters with an ASCII code lower than 20 hexadecimal, use a
backslash ('\') before the hexadecimal value. For instance, the 'Esc z' sequence
can be encoded by '\1Bz'.
Note: when the character string is longer than the length of the field, two
indicators are displayed at the left and at the right of the field.
A.1.4 - Special Notation
The set-up is a sequence of menus and sub-menus. Define an action by the
path followed through the set-up tree (hierarchy), using the following notation:
[item1]-[item2]-[action]
For example, to perform the above action, select item1 in the main menu, then
select item2 in the sub-menu.
A.1.5 - Exiting the set-up
To exit the set-up, select [Configuration]-[Quit].
If changes have been made while in the set-up, a dialog box appears:
- Select [YES] to save the modifications and exit the set-up. The new
AX3000 settings will then be stored in NVRAM (non-volatile memory).
- Select [NO] to abandon your changes and exit the set-up.