Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 177)

Installing under Windows
AX3000 - User's Manual
163
These parameters are:
- Port Name: redirect COM port name (from COM1 to COM255).
- DSR Signal (only for Aux1 and Aux2): the DSR signal is not supported
by the AX3000 native auxiliary ports. This parameter allows the incoming
DSR value to be emulated. The possible values are: "Always Low",
"Always Up", "Follows CTS" or "Follows CD".
The COM port declaration is completed. For the redirection procedure, consult
the next sub-section.
c) Redirecting Resources within the RDP session
To redirect resources within a session select the session profile box (menu
[Configuration]-[Sessions]-[Session X]). Within this box, select 'Redirected
Resources' and press . The following box is displayed:
These parameters are:
- Redirected Printer: printer(s) are selected through a list. This list is
composed by the following items:
- All
- None
- Printer Name (port): these are the RDP/ICA printer name(s). This
allows the selection of only one printer to be redirected.
- Default printer: set (or not) a printer as the default printer.
- Redirected COM Port: COM port(s) are selected through a list. This list
is composed by the following items:
- All