Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 254)

Appendix
240
AX3000 - User's Manual
Ethernet Parameters
ethernet_link= (Auto-sense | 10BT HD | 10BT FD |
100BT HD | 100BT FD)
ethernet_network_discover=no (yes | no)
ethernet_dhcp_used=no (yes | no)
ethernet_dhcp_netmask= (yes | no)
ethernet_dhcp_defrouter= (yes | no)
ethernet_dhcp_DNSserver= (yes | no)
ethernet_dhcp_srchdomain= (yes | no)
ethernet_dhcp_leasetime= (number)
ethernet_dhcp_clientid=
(character string, 10 char max.)
ethernet_dhcp_tracemode= (yes | no)
ethernet_dhcp_checkipaddr= (yes | no)
#ethernet_ipaddr=192.168.1.241 (IP address format)
#ethernet_netmask=255.255.255.0 (IP address format)
ethernet_axname=axel203039 (character string, 64 char max.)
ethernet_axDNS=default DNS dom (character string, 64 char max.)
ethernet_updateDNS=dhcp
(no | dhcp | terminal)
Note: when a configuration file is obtained from an AX3000, the
"ethernet_ipaddr" and "ethernet_netmask" parameters are commented out (in
order that the file may be used for configuring other AXEL Terminals).
TCP/IP Parameters
ethernet_dns_servIP% (IP address format)
ethernet_dns_domain% (character string, 64 char max.)
tcp_dns_FQDNexists= (display error | abort | continue)
tcp_dns_tracemode=no (yes | no)
tcp_host%_name=vangogh (character string, 64 char max.)
tcp_host%_ip=192.168.1.252 (IP address format)
tcp_router%_ip=192.168.1.252 (IP address format)
tcp_router%_target=192.1.1.252 (IP address format | default)
tcp_router%_mask=255.255.255.0 (IP address format)
tcp_ping_setip=yes
(yes | no)
tcp_tnsetup_port=4096 (number)
tcp_remoteCtrl_allowed=no
(yes | no)
tcp_remoteCtrl_port=4097 (number)
tcp_remoteCtrl_enpassword=
(character string, 15 char max.)