Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 216)

Tools and Statistics
202
AX3000 - User's Manual
This chapter describes the embedded AX3000 tools.
The AX3000 provides the following features:
- Ping command
- Connection management
- Statistics environment
Note: these functions are accessed from the AX3000 interactive set-up.
9.1 - THE PING COMMAND
The ping command is used to check for the presence of a live TPC/IP device.
Select the [Diagnostics]-[Ping] dialog from the AX3000 set-up, then enter the
IP address or the name of the TCP/IP peripheral.
After a few seconds, the status of the TCP/IP device will be displayed (alive or
not alive).
9.2 - CONNECTION MANAGEMENT
Connection failures are often caused by incorrect settings.