Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 226)

Remote Administration
212
AX3000 - User's Manual
- Screen size: 80x25
- Scrolling mode disabled
Notes:
- To disable the telnet set-up, set the TCP port to 0.
- When the telnet set-up is running, the set-up is also displayed on the
target terminal. The keyboard of the target terminal is locked.
- The AX3000 server telnet supports the keepalive mechanism (value 3
minutes). In event of network incident, the set-up will be automatically
ended and the keyboard of the target terminal will be unlocked.
The possible connection errors are:
- The interactive set-up is already in use on the target terminal.
- The client telnet doesn't negotiate a TERM value "ansi".
10.3 - BATCH REMOTE SET-UP
This feature enables an AX3000 to be set up remotely, using the remote
administration command. A text file (provided as an argument to the remote
administration command) defines the value of some or all set-up parameters. It
can either be:
- Created with a text editor or
- Obtained by a remote administration command on an AX3000 already
set-up.
The remote administration command depends on the operating system. Refer
to the Chapter 5.5 (Unix/Linux), the Chapter 6.4 (OS/400) or the Chapter 7.3
(OS/390).
The remote administration command parameters are:
- The name or the IP address of the AX3000,
- A command: one of the 3 following keywords:
- setup_send : set-up an AX3000,
- setup_get
: get an AX3000 configuration,
- ax_reboot : reset an AX3000.
Note: to access an AX3000 with the rsh command, the IP address of the