Axel AX3000 65 User's Manual - firmware 0632 - Manual (Page 259)

Appendix
AX3000 - User's Manual
245
usb%_associate_pprsrc2= (character string, 10 char max.)
usb%_associate_envelope= (character string, 10 char max.)
usb%_associate_ascii899=no (yes | no)
usb%_associate_wscstname= (character string, 8 char max.)
usb%_associate_wscstlib= (character string, 8 char max.)
usb%_associate_transp= (yes | yes-hexa)
usb%_associate_transp-seq= (character string, 4 char max.)
usb%_tcp_window=1024 (number)
usb%_tcp_mss=512 (number)
usb%_tcp_ttl=64 (number)
usb%_tcp_setport=random
(ramdom | fixed)
usb%_tcp_nagle=disable (disable | enable)
usb%_tcp_keepalive=no (yes | no)
usb%_tcp_keepaliveval=120 (number)
d) TCP Logical Ports
In the following section of the file, for ease of reading the TCP logical port
number (1 to 4) has been represented by the '%' character. In a real
configuration file, the parameters for each port would, of course, be listed.
net%_host= (character string, 64 char max.)
net%_port=9100 (number)
net%_inactivity_to=60 (number)
net%_service=none
(none | rtty | printd | lpd | rcmd
Prt5250 | Prt3270 | tty)
net%_service_name=Usb% (character string, 8 char max.)
net%_associate_host=vangogh (character string, 64 char max.)
net%_associate_term=ansi (character string, 8 char max.)
net%_associate_autoconn=yes (yes | no)
net%_associate_reconn=yes (yes | no)
net%_service_tcpport=2050 (number)
net%_rtty_accept=no
(yes | no)
net%_filter_nl=no (yes | no)
net%_preprint_string= (character string, 48 char max.)
net%_postprint_string= (character string, 48 char max.)
net%_associate_devname= (character string, 10 char max.)
net%_associate_msgqname= (character string, 10 char max.)
net%_associate_msgqlib= (character string, 10 char max.)