Axel AX3000 65 User's Manual - firmware 0632 User Manual
Page 251
Appendix
AX3000 - User's Manual
237
A.5 - REMOTE SET-UP CONFIGURATION FILE FORMAT
A configuration file can list some or all AX3000 set-up parameters.
The configuration file begins with the header label (BEGIN_AX_SETUP) and
ends with the trailer label (END_AX_SETUP).
Example:
BEGIN_AX_SETUP V1.1
# this is a comment
tcp_host1_name=vangogh
...
END_AX_SETUP
Note: lines beginning with '#' are treated as comments and ignored.
The set-up parameters may be grouped as follows:
Ethernet:
Ethernet interface parameters,
TCP/IP: network
environment,
AUX% Port:
port service and communication parameters,
Parallel Port:
port service,
Usb% Port:
port service,
Net% Port:
port service,
Terminal:
global parameters (screen, keyboard, etc),
Multi-session:
session numbers, hot keys, etc
Session %:
session parameters.
Several formats are available for set-up parameter values:
List:
the possible values are listed (the character '|' is
used as a separator). Example: (yes | no).
Number:
maximum and minimum values are given.
IP address format:
the IP address format is a.b.c.d.
Character string:
maximum length is given.
Note: an ASCII character can be represented by
its hexadecimal ASCII code, preceded by a
backslash character (e.g.: \1B represents Escape
and \\ represents a backslash).