Avery Dennison Monarch 9855 Programmer Manual User Manual
Page 9
Introduction 1-5
♦
For the Values, use the exact text listed in this manual (or the
printer’s offline menu). For example, Speed=10 does not work, use
Speed="10.0 IPS"
, which is how it appears in the printer’s offline
menu.
♦
Only include the Keys you need to change from their current value in
the NCL file.
♦
Place comments after a semicolon (;).
♦
Strings containing spaces must be in quotes ("").
♦
NCL files must start with [NCL_START] and end with [NCL_End].
♦
One NCL file can contain multiple sections for different printer models,
for example, [Printer.9855] and [Printer.9860]. Information
that does not match the current printer is ignored.
♦
Use the [Printer.General] section to change values for all printer
models with NCL capability on your network.
♦
Each line, including [NCL_End] must end with a carriage return, a line
feed, or both (carriage return and a line feed).
♦
When specifying a pathname or filename, the spelling, capitalization
and spacing must match exactly.
♦
Do not use a backslash (\) or a forward slash (/) at the beginning of
the pathname. Follow the standard conventions for your operating
system (Microsoft
® Windows®, UNIX®, etc.) For example, UNIX uses
a forward slash while Microsoft Windows uses a backslash. However,
some FTP and TFTP software only accepts one or the other and
substitutes the character for the appropriate operating system.