Avery Dennison Monarch 9855 Programmer Manual User Manual
Page 19

Configuring the Network 3-1
C O N F I G U R I N G T H E N E T W O R K
Use the syntax provided in this chapter to write the network-
specific section of an NCL file including TCP/IP, wireless, and network
time protocol settings.
Refer to the MonarchNet2 Operating Instructions for more information
about each option.
T C P / I P S e t t i n g s
For the recommended file sequence of sections in an NCL file, see “NCL
File Sequence” in Chapter 1.
Syntax
[NCL_START]
[NIC.TCPIP.7411BG]
Keys=values
[NCL_END]
Note:
Using version 5.4 or greater software, use .7411BG as the
section name. With previous software versions, use .7411 as
the section name.
Keys
Description
Select ONE of the following:
Address
Sets the network address
nnn.nnn.nnn.nnn
Banner
Enables trailing banner page for lpr/lpd jobs
Enable | Disable
Boot
Number of DHCP/BOOTP/RARP tries
1 to 10
Chksum
Enables the IP receive checksum
Enable | Disable
Keepalive
Sets the IP keepalive timer in minutes
1 to 65534
0 keep
alive
indefinitely
Method
Sets the method of obtaining the IP address
Auto | Static | BOOTP | DHCP |
RARP
RARP
Selects whether to set the subnet mask or router
1 | 2 | 3
1
Subnet mask is not set
2
Router is not set
3
Neither the subnet mask
or router address is set
Subnet
Sets the subnet mask
nnn.nnn.nnn.nnn
Timeout
Sets the inactivity timeout in minutes
0 to 255
0 No
timeout
3