Avery Dennison Monarch 9855 Programmer Manual - Manual (Page 22)

3-4 NCL Programmer’s Manual
Example [NCL_START]
[NIC.EN.7411BG]
WEP=64-bit
ActiveKey=1
KeyVal=12345678ABCDEF
ActiveKey=2
WepKey=FEDCBA87654321
ActiveKey=1
SSID=Acme001
APDensity=MED
[NCL_END]
This NCL file enables 64-bit WEP and sets values for WEP Key 1
(12345678ABCDEF) and Key 2 (FEDCBA87654321) and selects Key 1 as
the currently used Key. The SSID is set to Acme001. The access point’s
density is MED (2 to 5.5 Mbps communications).
Note: WEP key values must be entered in Hex.
Example [NCL_START]
[NIC.EN.7411BG]
Enc=WPA2
InAP=PAP
WPAGroup=EN
[NCL_END]
This NCL file sets the encryption to WPA2 and the inner authentication
protocol to PAP. A group key is used for data link encryption.