Avery Dennison Monarch 9855 Programmer Manual User Manual
Page 32
4-8 NCL Programmer’s Manual
When specifying the FTP_Path, note the following:
♦
The path is relative to the server’s base directory.
♦
Do not use a backslash (\) or a forward slash (/) at the beginning of
the pathname.
♦
Follow the standard conventions for your operating system
(Microsoft
® Windows®, UNIX®, etc.) For example, UNIX uses a
forward slash while Microsoft Windows uses a backslash. However,
some FTP and TFTP software only accepts one or the other and
substitutes the character for the appropriate operating system.
Example [NCL_START]
[FirstCfg]
IPAddr=192.0.0.192
FTP_User=Whseshift1
FTP_Password="Paxar1"
Mode=FTP
Path="firstconfig\Config1A.txt"
Arm=1
Clear=1
[NCL_END]
Creates an initial (first) configuration file that connects to the FTP server
(192.0.0.192) with the user name Whseshift1 and password Paxar1. The
file, Config1A.txt is downloaded from the firstconfig directory. Then,
the file is cleared.