Avery Dennison Monarch 9855 Programmer Manual - Manual (Page 17)

Configuring the Printer 2-3
Keys Description Select ONE of the following:
PromptSet Selects the prompt set English | French | German | Spanish |
Japanese | Portuguese | Italian |
Swedish | Spanish 2 | Danish | Dutch |
Finnish | Norwegian
FlashStorage Enables flash storage Disabled | Enabled
VerifyState Enables the verifier Enabled | Disabled
ScanBeam Enables the scan beam Off When Idle | Always On
VerifMode Selects the verifier mode Def 2 | Def 19
VerifClearData Clears the verifier’s data Yes | No
CableDetect Detects the verifier’s cables None | I/O | I/O & Data
Example [NCL_START]
[Printer.9855]
SupplyType="Die Cut"
Ribbon=Yes
FeedMode=Continuous
MarginPosition=15
Contrast=100
Speed="8.0 IPS"
[NCL_END]
This NCL file for the 9855 printer uses die cut supply, a ribbon,
continuous feed mode, sets the margin position to 15, and uses 8.0 IPS
printing. The contrast is set to 100.