Avery Dennison Monarch 9855 Programmer Manual User Manual
Page 31

Requesting File Transfers 4-7
S p e c i f y i n g a F i r s t C o n f i g u r a t i o n F i l e
Specifies which configuration file should be loaded the very first time a
printer is turned on. You may want the loaded file to
♦
display a custom menu.
♦
load a configuration file set up to mimic factory defaults.
The [FirstCfg] section only specifies a file to load and the loading method
(FTP/TFTP); it does not create the file to be loaded. The specified file
must already exist. The [FirstCfg] section may appear anywhere in the
NCL file.
This first configuration file can also be selected from the printer’s Main
Menu, select Setup, Network, then Get First NCL.
Syntax
[NCL_START]
[FirstCfg]
Keys=values
[NCL_END]
Keys Description
Values
IPAddr
IP address or domain name of host FTP
server
nnn.nnn.nnn.nnn
FTP_User
User name for FTP server
"username"
FTP_Password
Password for FTP server
"password"
Mode
Transfer mode
TFTP
FTP
Path
Relative path to file being downloaded
"sub-directory\filename"
Arm
Creates an NCL first configuration flash
file using the values stored in memory.
This file is processed the next time the
printer is turned on.
1
creates the file
Clear
Sets a flag to clear the data before starting
the next NCL file
1
clears the file
Note:
Use quotation marks if username, password, path, or filename
contain spaces.