Avery Dennison Monarch 9855 Programmer Manual User Manual
Page 63

Samples A-3
U p d a t i n g F i r m w a r e
You can use NCL files to update the printer and the NIC firmware, both
the main application and the bootloader. The [Firmware] section of this
sample tests the printer's and NIC's firmware revisions against the
versions named in the sample and reflashes as needed. When all of the
firmware is up to date, the printer and NIC are configured with the listed
parameters.
Note:
Not all firmware versions must be listed in the NCL file. Printer
and NIC configuration do not need to be in the same file with the
firmware configuration.
[Firmware] ;
Firmware section
IPAddr=10.1.158.241 ;
Server IP address
PrnBootVer="VERSION 3.2" ;
Target version of printer boot
;
firmware
PrnBootPath="PrnBoot\r1832.bin" ;
Path to that version
;
of firmware
PrnAppVer="Version 5.0" ;
Printer application version
PrnAppPath="PrnApp\a1850.bin"
NICBootVer="8.2" ;
NIC bootloader version
NICBootPath="NICBoot\82.bin"
NICAppVer="CZMO-7.01" ;
NIC application version
NICAppPath="NICApp\czmo701.bin"
[NIC.TCPIP.7411BG] ;
NIC configuration instructions
Boot=4
Method=Bootp
[NIC.EN.7411BG]
ActiveKey=1
KeyVal=12345678ABCDEF
ActiveKey=2
KeyVal=FEDCBA87654321
ActiveKey=1
ENC=64
SSID=Acme001
APDensity=MED
[Printer.9855] ;
Printer configuration instructions
Ribbon=Yes
SupplyType="Die Cut"
FeedMode=Continuous
Contrast=1
Speed="8.0 IPS"