Avery Dennison Monarch 9855 Programmer Manual - Manual (Page 7)

Introduction 1-3
U s i n g T h i s M a n u a l
Following is a summary of the contents of this manual.
Chapter Contents
1 Introduction Information you should know before using NCL.
2 Configuring the
Printer Information about creating NCL files to configure
the printer, including specifying the supply type,
contrast, and communication values.
3 Configuring the
Network Information about creating NCL files to configure
the network, including Ethernet and wireless
settings including IP address, SSID, and security.
4 Requesting File
Transfers Information about requesting/receiving files using
FTP and TFTP and specifying an initial (first)
configuration file.
5 Using
Configuration Files Information about uploading and modifying NCL
files and printer cloning.
6 Creating a Custom
Menu Information about creating custom menus to
perform specific tasks.
7 Using a Database Information about searching a database.
8 Using Flash Files &
Updating Firmware Information about creating a flash file, using
BOOTP/DHCP to boot the printer, and updating the
printer’s firmware.
9 Troubleshooting Information about creating a log file and any errors
you may encounter with NCL.
A Samples Several sample NCL files.
B Defaults Lists the printer default values.