Avery Dennison Monarch 9855 Programmer Manual - Manual (Page 16)

2-2 NCL Programmer’s Manual
Keys Description Select ONE of the following:
BatchSeparators Enables batch separators No | Yes | Long
SkipIndex Enables skip index mode (print one
image over multiple labels)
Yes | No
KnifeCtrl Adjusts the length of cut tags -20 to 20
ErrorAction Sets the error action mode Normal | Ostrk/Cont 1X |
Ostrk/Cont 2X | Ostrk/Cont 3X |
Ostrk/Cont 4X | Ostrk/Cont 5X
Contrast Adjusts the print contrast -699 to 699
BaudRate Selects the baud rate for the main serial
port
1200 | 2400 | 4800 | 9600 | 19200 |
38400 | 57600 | 115200
WordLength Selects the word length for the main
serial port 7 | 8
StopBits Selects the stop bits for the main serial
port 1 | 2
Parity Selects the parity for the main serial port None | Odd | Even
FlowControl Selects the flow control for the main
serial port None | Xon-Xoff | DTR | CTS
Reset Resets the serial port to default values No | Yes
ParPort Selects the parallel port External | Internal
ParMode Selects the parallel port mode Compatible | IEEE-1284
Monetarysign Selects the monetary sign None | USA | UK | Japan | Germany |
France | Spain | Italy | Sweden |
Finland | Austria | India | Russia |
Korea | Thailand | China | Euro-Dollar
SecondarySign Selects the secondary monetary sign No | Yes
DecimalPlaces Selects the number of decimal places 0 | 1 | 2 | 3
SlashedZero Enables the slashed zero No | Yes
PowerUpMode Selects the power up mode Online | Offline