Avery Dennison Monarch 9855 Programmer Manual User Manual
Page 10
1-6 NCL Programmer’s Manual
NCL File Sequence
When creating NCL files, follow the standard syntax guidelines outlined
above and keep in mind the following:
♦
Since all lines are processed in the order received and file transfers
may take several minutes to complete, do not request file transfers
while making changes to the network configuration in the same NCL
file.
♦
Creating a custom menu [MenuStart] requires the user to make a
selection before processing any instructions in the rest of the NCL file.
♦
Make sure all lines within the [MenuStart] section are arranged
logically.
♦
Certain sections should be at the beginning of the NCL file or in a
separate NCL file to avoid losing data. For example, after the
firmware is updated, the printer and network card are reset.
♦ When creating NCL files, we recommend arranging the sections in this
order:
[NCL_START]
[Flash]
[Log]
[Firmware]
[FirstCfg]
****
[General]
TestLabel=1
[Config]
[NCL_END]
****
At this point in the file, you can include configuring the printer
[Printer.9855], network card [NIC.TCPIP.7411BG], network time
[Time], or other sections not previously listed.
Note:
Not all sections are needed in every NCL file.