Artesyn MVME6100 Single Board Computer Installation and Use (June 2014) - Manual (Page 94)

Pin Assignments
MVME6100 Single Board Computer Installation and Use (6806800D58H) 94
5.2.6 VMEBus P2 Connector (PMC Mode)
The VME P2 connector is an 160-pin DIN. Row B of the P2 connector provides power to the
MVME6100 and to the upper eight VMEbus address lines and additional 16 VMEbus data lines.
The pin assignments for the P2 connector are as follows:
23 Reserved AM4 GND A15 Reserved 23
24 GND A07 IRQ7* A14 Reserved 24
25 Reserved A06 IRQ6* A13 Reserved 25
26 GND A05 IRQ5* A12 Reserved 26
27 Reserved A04 IRQ4* A11 Reserved 27
28 GND A03 IRQ3* A10 Reserved 28
29 Reserved A02 IRQ2* A09 Reserved 29
30 GND A01 IRQ1* A08 Reserved 30
31 Reserved -12V +5VSTDBY +12V Reserved 31
32 GND +5V +5V +5V Reserved 32
Table 5-12 VMEbus P1 Connector Pin Assignments (continued)
ROW Z ROW A ROW B ROW C ROW D
Table 5-13 VMEbus P2 Connector Pin Assignments (PMC Mode)
ROW Z ROW A ROW B ROW C ROW D
1 PMC1_2
(J24-2) PMC0_2
(J14-2) +5V PMC0_1 (J30 D6-C6) or
P2_IO_GLAN1_MDIO_1- (J30
B6-C6) PMC1_1
(J24-1) 1
2 GND PMC0_4
(J14-4) GND PMC0_3 (J30 D5-C5) or
P2_IO_GLAN1_MDIO_1+
(J30 B5-C5) PMC1_3
(J24-3) 2
3 PMC1_5
(J4-5) PMC0_6
(J14-6) RETRY# PMC0_5 (J30 D4-C4) or
P2_IO_GLAN1_MDIO_0- (J30
B4-C4) PMC1_4
(J24-4) 3
4 GND PMC0_8
(J14-8) VA24 PMC0_7 (J30 D3-C3) or
P2_IO_GLAN1_MDIO_0+
(J30 B3-C3) PMC1_6
(J24-6) 4