Artesyn MVME6100 Single Board Computer Installation and Use (June 2014) - Manual (Page 103)

Pin Assignments
MVME6100 Single Board Computer Installation and Use (6806800D58H) 103
5.3.5 Front/Rear Ethernet and Transition Module Options Header
(J30)
The pin assignments for this connector are as follows:
7 COM2_DTR COM2_RI 8
9 GND KEY (no pin) 10
Table 5-19 COM2 Planar Serial Port Header (J29) Pin Assignments (continued)
Pin Signal Signal Pin
Table 5-20 Front/Rear Ethernet and Transition Module Options Header (J30) Pin Assignment
Pin
Row D
(From PMC I/O) Row C
(To P2 Connector)
Row B
(From LAN2
Controller) Row A
(To Front Panel
Ethernet)
1 PMC0_IO(13) P2 a _C7
a. VME P2.
Fused +12V No Connect
2 PMC0_IO(60) P2_A30 Fused -12V No Connect
3 PMC0_IO(7) P2_C4 magnetic T2
b
-23
b. Transformer for Ethernet port #2.
MDI_0P (J9
c
-2)
c. Ethernet port #2 front connector.
4 PMC0_IO(5) P2_C3 magnetic T2-22 MDI_0N (J9-3)
5 PMC0_IO(3) P2_C2 magnetic T2-20 MDI_1P (J9-4)
6 PMC0_IO(1) P2_C1 magnetic T2-19 MDI_1N (J9-5)
7 PMC1_IO(38) P2_Z25 magnetic T2-17 MDI_2P (J9-6)
8 PMC1_IO(41) P2_Z27 magnetic T2-16 MDI_2N (J9-7)
9 PMC1_IO(44) P2_Z29 magnetic T2-14 MDI_3P (J9-8)
10 PMC1_IO(46) P2_Z31 magnetic T2-13 MDI_3N (J9-9)