Artesyn MVME6100 Single Board Computer Installation and Use (June 2014) - Manual (Page 64)

Functional Description
MVME6100 Single Board Computer Installation and Use (6806800D58H) 64
On-board Peripheral Support – Dual 10/100/1000 Ethernet ports routed to front panel RJ-45
connectors, one optionally routed to P2 backplane
– Two asynchronous serial ports provided by an ST16C554D; one
serial port is routed to a front panel RJ-45 connector and the second
serial port is routed to an on-board header (J29, as factory default
build configuration).
PCI/PMC – Two 32/64-bit PMC slots with front-panel I/O plus P2 rear I/O as
specified by IEEE P1386
– 33/66 MHz PCI or 66/100 MHz PCI-X
VME Interface – Tsi148 VME 2eSST ASIC provides:

Eight programmable VMEbus map decoders
 A16, A24, A32, and A64 address
 8-bit, 16-bit, and 32-bit single cycle data transfers
 8-bit, 16-bit, 32-bit, and 64-bit block transfers
 Supports SCT, BLT, MBLT, 2eVME, and 2eSST protocols
 8 entry command and 4KB data write post buffer
 4KB read ahead buffer
PMCspan Support – One PMCspan slot
– Supports 33/66 MHz, 32/64-bit PCI bus
– Access through PCI6520 bridge to PMCspan
Form Factor – Standard 6U VME
Miscellaneous – Combined reset and abort switch
– Status LEDs
– 8-bit software-readable switch (S1)
– VME geographical address switch (S3)
– Boundary Scan header (J8)
– CPU RISCWatch COP header (J42)
Table 4-1 MVME6100 Features Summary (continued)
Feature Description