Artesyn Centellis 2000 Shelf Release 3.0 Installation and Use (May 2014) User Manual

Page 94

System Installation

Centellis 2000 Shelf Release 3.0 Installation and Use (6806800L99G)

4. Set the breakers on the PEM face plates to the OFF (tripped) position if they are not

already in this position.

5. Make sure that the external power feeds you plan to attach are powered off and

cannot be switched on while you are working.

6. Remove the insulation from the ends of the power cables.

7. Crimp the ends of the power cables.

8. Loosen the screws on both sides of the pluggable screw terminals.

System Damage
Applying feed power to the PEM with the PEM breaker in the ON position damages your
system and/or system components.
The PEM breaker must be in the OFF position when you turn on the feed power.

This manual is related to the following products:

Centellis 2000 DC-1.2 Installation and Use (May 2014) Centellis 2000 Shelf-AC Installation and Use (May 2014) Centellis 2000 Shelf - DC Installation and Use (June 2014) Centellis 2100 Release 3.0 Installation and Use (March 2015)