Artesyn Centellis 2000 Shelf Release 3.0 Installation and Use (May 2014) - Manual (Page 147)

Chapter 8
Centellis 2000 Shelf Release 3.0 Installation and Use (6806800L99G) 147
Network Management and System Access
8.1 Overview
The following sections provide information that you need after you have successfully installed
the hardware.
8.2 Accessing System Components
All system components are delivered with the software installed. If you want to upgrade or
need to reinstall the software on these system components, you can use the interfaces of the
MF106 to access the consoles and command line interfaces of the different system
components.
The MF106 can be reached through SSH.
user name: root
password: root
The shelf geographical address (SGA) is set during the system installation via a network
connection (see section
Setting the Shelf Geographical Address on page 151 ). The default shelf
geographical address is 0.
The MF106 stores the shelf FRU data and the SGA persistently.
Section Description
Accessing System Components on page
147
This section contains information on which component can
be accessed via which interface.
Network Management on page 148 This section contains information on the various addresses
you need to access system components.
The information in the following subsections assumes that you have set the shelf address on
both MF106 shelf managers to the same value.